Waterman W8 series submersible motors are water Lubricated designed for installation in 8" diameter or larger water wells. These motors can be easily rewound and repaired.
Waterman W8 Series Submersible motors are robust rewindable and pre-filled with clean water mixed with anti-corrosion fluid. The stator winding is of poly wrap double coated copper winding wires. It features water lubricated radial and thrust bearings. Dynamically balanced rotor of these Waterman W8 Series submersible motors maintain uniform clearance to give better efficiency and increase the life cycle of the water lubricated bush. Specially designed high performance thrust bearings are used to withstand high axial thrust loads.
Pressure equalizing rubber diaphragm is provided to guard against pressure and volume variations due to thermal expansion of water inside the motor. Motor is sealed by "O" rings, shaft seals and sand guards to prevent leakage of motor lubricant and ingress of well water, sand and fiber particles in to the motor. Mounting dimension of motors are in accordance with "NEMA" standard.
Motor Body | : | SS304 |
Stator Stamping | : | Electrical Grade Silicon Steel |
Thrust Bearing | : | SS420 Segment With Carbon Plate |
Rotor Shaft | : | SS420 / SS431 |
Bush | : | GM LTB4 & NITRILE RUBBER |
Seal | : | Nitrile Rubber |
Winding Wire | : | Polywrap Doublecoated Copper Wire |
Upper & Lower Bearing Housing , Connecting Piece | : | CI FG 200 With CED COATING |
Rewindable Pre-Filled Motor | ||
Degree Of Protection | : | IP 68 |
Max Water Temperature | : | 35° C |
Nos. Of Start Per Hour | : | Max 20 At Regular Intervals |
Voltage Variation | : | +6% / -10% At Rated Voltage. |
Motor Cable Length | : | 3.0 meters (3 core) |
Mounting | : | NEMA Standards Vertical |
Power Range | : | Three Phase : 7.5kW-75kW AC Three Phase Operating Voltage Band : 300-415 V , 50HZ |
Speed | : | 2900 RPM |
Model | KW | HP | MOTOR LENGTH (MM) |
---|---|---|---|
W8TP0100H5CITR | 7.5 | 10 | 919 |
W8TP0125H5CITR | 9.3 | 12.5 | 939 |
W8TP0150H5CITR | 11 | 15 | 969 |
W8TP0200H5CITR | 15 | 20 | 999 |
W8TP0250H5CITR | 18.5 | 25 | 1039 |
W8TP0300H5CITR | 22 | 30 | 1069 |
W8TP0350H5CITR | 26 | 35 | 1139 |
W8TP0400H5CITR | 30 | 40 | 1164 |
W8TP0500H5CITR | 37 | 50 | 1269 |
W8TP0600H5CITR | 45 | 60 | 1379 |
W8TP0750H5CITR | 55 | 75 | 1469 |
W8TP0850H5CITR | 63 | 85 | 1549 |
W8TP1000H5CITR | 75 | 100 | 1624 |
NOTE : W8 – 8” MOTOR, TP- THREE PHASE , CITR – CAST IRON TURBO TYPE ( OPEN WINDING )
8” WATER LUBRICATED SUBMERSIBLE MOTOR THREE PHASE AT 415V 50HZ | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
KW | HP | AMPERE RANGE (A) | FULL LOAD | MAX. DOWN THRUST LOAD (N) | STARTING TORQUE (Nm) | TORQUE (Nm) | CABLE | CABLE LENGTH (MTR.) | |||
FULL LOAD MAX. | STARTING CURRENT | EFFICIENCY % | POWER FACTOR | CABLE SIZE (SQ.MM) | |||||||
S/D | ATS | ||||||||||
7.5 | 10 | 17.50 | 72.00 | 78 | 0.83 | 36000 | 26.00 | 24.40 | 2.5 | - | 3 |
9.3 | 12.5 | 19.80 | 87.00 | 79 | 0.83 | 36000 | 36.00 | 29.80 | 2.5 | - | 3 |
11 | 15 | 24.00 | 108.00 | 80 | 0.84 | 36000 | 40.00 | 41.50 | 4 | - | 3 |
15 | 20 | 32.00 | 144.00 | 81 | 0.86 | 36000 | 54.00 | 59.80 | 4 | - | 3 |
18.5 | 25 | 40.00 | 184.00 | 83 | 0.85 | 36000 | 68.00 | 85.00 | 6 | - | 3 |
22 | 30 | 48.00 | 226.00 | 83 | 0.85 | 45000 | 74.00 | 105.00 | 6 | - | 3 |
26 | 35 | 54.00 | 264.00 | 84 | 0.86 | 45000 | 88.00 | 126.00 | 10 | 16 | 3 |
30 | 40 | 58.00 | 290.00 | 84 | 0.85 | 45000 | 100.00 | 140.00 | 10 | 16 | 3 |
37 | 50 | 70.00 | 360.00 | 85 | 0.86 | 45000 | 120.00 | 174.00 | 16 | 25 | 3 |
45 | 60 | 85.00 | 460.00 | 85 | 0.85 | 45000 | 145.00 | 235.00 | 16 | 25 | 3 |
55 | 75 | 102.00 | 612.00 | 85 | 0.87 | 45000 | 180.00 | 330.00 | 16 | 35 | 3 |
63 | 85 | 112.00 | 680.00 | 85 | 0.85 | 45000 | 214.00 | 410.00 | 25 | 35 | 3 |
75 | 100 | 125.00 | 770.00 | 84 | 0.86 | 45000 | 240.00 | 460.00 | 25 | 35 | 3 |